How to build an inside-the-wall toilet with technical standards rapidly?

One of the products with a chic and practical design is the inside-the-wall toilet. This is regarded as the best way to maximize bathroom space savings. However, because this device requires advanced installation methods, many buyers are hesitant to choose. In light of this, we have created a straightforward guide for installing an inside-the-wall toilet at home while meeting all technical criteria.

 

Tips to install a basic inside-the-wall toilet at home, which not everyone is aware of.

What is inside-the-wall toilet ?

Before fully understanding about the inside-the-wall toilet, we should go through the overview of this design.The only parts of this design that are visible from the outside are the flushing button and body. This serves as both the design’s trademark and a significant benefit.

Advantages 

• Bathroom space saving: Because the toilet’s water tank was concealed, the toilet area was preserved and the pressure on the floor was effectively decreased.
• Completely meets the features of a standard toilet, saving water, reducing the growth of plaque, and flushing in an incredibly convenient manner.
• The body will have a constant distance from the floor, making installation and cleaning simple as ever.

Disadvantages

On the other hand, inside-the-wall toilet also contant a few of drawbacks:

• high prices
• Installation requirements are high, proper technique must be used, and building time is longer than for typical products.

Should we purchase an inside-the-wall toilet?

Many homeowners today probably ask this question the most. An inside-the-wall toilet will make your home pleasant, contemporary, and clean. Therefore, purchasing such a high-end toilet for a living area is extremely appropriate and required.

How to build an inside-the-wall toilet with technical standards rapidly?

To use the best strategy during installation, the installer must read the wall-mounted toilet’s installation handbook first. Additionally, it aids in maximizing toilet performance. Keep in mind that in order to install this kind of tank, your wall must be at least 200mm thick. Let’s follow the simple instructions below to learn how to build an inside-the-wall toilet! 

Installation diagram

Let’s examine the inside-the-wall toilet’s design drawing in more detail for a speedy and effective installation. Position the structure for disassembly next to decide which installation procedure is best.

Requirement tools

• Screwdrivers
• Silicone resin blend
• Cement
• Pliers
• Tape measure
• Wrench
• Driller
• Livo

Make sure the water supply and drainage pipes have been cleansed before installation to prevent unforeseen issues.

 6 steps to build up the inside-the-wall toilet.

Step 1: Install water supply pipes.

warning: To make sure the pipe fits the inside-the-wall toilet you are about to install, you must specify the pipe’s diameter when you install it.

Step 2: Install wall accessories.

• The wall will have accessories installed inside of it, so a minimum thickness of 200mm is required for installation.
• The outside tiles are installed after the wall-mounting accessories are finished, but the water supply and drainage pipes are left unblocked and the bolts need to be tightened.
• Standard toilet installation heights range from 0 to 120mm.

Step 3: Setting up a sewage system

We now move on to installing the sewage system after finishing the aforementioned processes. Depending on the requirements for installing a toilet for your household, you can choose straight or curved sewage pipes.

Step 4: Building flushing systems.

• When installing, it’s important to thoroughly inspect the pipe by the water discharge site for the presence of debris, sand, or soil.
• Be cautious when choosing the pipes’ substance; it is not advised to use soft pipes.
• To prevent water leakage when used, the tape must be wrapped at the lace position.

Step 5: Install the bracket for the inside-the-wall toilet.

Step 6: Put the inside-the-wall toilet on the bracket.

1. To stop water leaks, seal the joints using silicone or adhesive.
2. To make sure the toilet, pipes, and couplings are the same size, determine their exact dimensions.

Few warning when using

• Do not step or climb up the toilet
• The toilet shouldn’t be put next to heaters, other heat-emitting appliances, or in direct sunlight.
• When storing plastic components, use a non-concentrated cleaning solution.
• Sitting properly, because when sitting in the sideway will cause damage to the toilet.

Hopefully, the instructions for installing the inside-the-wall toilet and some additional information have improved your understanding of this subject. Additionally, don’t forget to check out the website https://demuhler.vn for additional fascinating details.